Skip to content
Every Mechanism

Home How a Zipper Works

Two rows of teeth, one small machine

How a zipper works

One pull turns two loose edges into a seam that locks every few millimetres. The slider does it.

Step by step
A brass jacket zipper up close on khaki canvas: the slider half way up, the two rows of teeth locked into one chain below it and open above it.
A size 5 brass jacket zipper, half closed.
3.4mm
between teeth in a row
14°
each arm of the slider's Y
≈290/s
teeth locking at a brisk pull
500N
it must hold, pulled across

Video

How a Zipper Works - The Tiny Machine in Your Jacket

Watch on YouTube

3D model · real size, 360°

Zip it, slow it, open it up

The slider's shell is see-through. Drag the slider or press Zip up, then slow it right down.

Try itPress Zip up, or click a part.
Loading the 3D model…

Meet the parts

Fifteen parts, one seam

The bottom end of the jacket zipper, its slider lifted apart. Tap a part or a name.

The bottom end of a brass jacket zipper on brown tapes: the retainer box and pins with clear film, the two rows of teeth closing and opening, the top stops at the end; above it the slider's parts lifted apart: diamond, top plate, spring, cap and pull tab; the bottom plate and one loose tooth in front.

Hover or tap the picture. Rust rings mark every part.

Parts diagram

From the pull tab to the teeth

Seen from the front. The numbers follow your pull through the slider.

A brass zipper from the front in four views. Top left: the slider half way up, its pull tab hanging down over the closed chain. Top right: the same with its top plate, cap and pull tab lifted off, showing the diamond, the lock spring and the two rows bending through the Y-shaped channel. Bottom left: the top stops. Bottom right: the retainer box with the insertion pin and the retainer pin, and clear film on the tape ends.

Top: the slider, then with its top lifted off. Below: the top end (left) and the bottom end (right).

    How it works, step by step

    The video’s 32 steps

    Each step with a moment from the video. Show me in 3D sets the model up the same way.

      The last 25 cm closing, slowed 8 times.
      Step 1 of 32

      One pull, one seam

        Demo · a machine made of wedges

        Small push, big squeeze

        A ramp turns a small push into a big lift. The slider’s sloping walls do the same to the teeth.

        –push up the ramp
        –lifts the 20 kg crate
        –pull on the slider
        –squeeze on the rows

        Demo · why the slider bends the rows

        Fan the gaps open

        A straight row’s gaps are too narrow for a head. Bend it, and they open like a book’s pages.

        –gap between heads
        1.95 mma head and its bump need
        –the head

        Demo · strong across, weak when bent

        Pull it apart, or peel it

        Pulled straight across, every bump stays trapped in its hollow. Peeled from one end, the teeth let go one at a time.

        –pull across the strip
        –bumps sharing it
        –on each bump

        Demo · the lock

        Stop the creep

        Spread the fronts and a slider without a lock slides open. A claw between two teeth stops it.

        –claw in the gap
        –the slider
        –crept down

        More to know

        Kinds, history and care

        Six kinds of zipper

        MetalSeparate brass teeth. This one.
        CoilOne plastic spiral, sewn on. Bends easily.
        MouldedPlastic teeth cast onto the tape.
        InvisibleThe coil hides behind folded tape.
        Water-resistantA rubbery film seals the front.
        AirtightRubber lips pressed shut. Dry suits, space suits.

        From hooks to zippers

        1. Elias Howe patents a clothing closure. It is never sold.
        2. Whitcomb Judson patents his clasp locker.
        3. Gideon Sundback’s hookless fastener.
        4. Sundback’s patent for it is granted.
        5. Rubber boots named “Zippers” give it its name.
        6. YKK is founded in Tokyo.
        7. Tailors take up the zip fly in trousers.

        Care and quick fixes

        • Seat the pin fully before you pull, or the rows start a tooth off.
        • Splitting behind the slider? Gently pinch its back end with pliers.
        • Caught fabric: ease the slider backwards, never force it.
        • Close it before washing.

        Things worth knowing

        The buzz is the teethAbout 290 lock a second at a brisk pull.
        Half a toothThe rows are shifted 1.7 mm, so heads face gaps.
        Size = widthA size 5 chain is about 6 mm wide.
        Coils healRun the slider back over a split coil and it re-meshes.
        A tiny jobA full zip takes about 2.4 J: an apple lifted two metres.
        BillionsOne maker alone makes billions of zippers a year.
        Quick check

        Four questions